Saddle seat counter stool – Bar stools are ideal for accountants and unlike traditional chairs, use little space. It can fit into cramped kitchens and easily stored. Having a chair seat design can add much needed comfort for bar stools, you making them suitable for everyone regardless of age. If you already have bar stools hand, replacing conventional seats for other chair it is easy to do, even if you are an amateur carpenter.
Make a saddle seat counter stool; saw down three plates 1-by-6 inches with a total length of 14 centimeters. Cut a shallow arc two tables with a saw, leaving about 1/3 inch at the deepest point of the arc. The bow should be cut on the side of the board, not his face. Arena joints with sandpaper until smooth put a round light on the edges. Set the boards together using wood glue, placed 1/2 inch from the edges and in the center. A bow must face down and the other up, with the board without cutting into the middle. Screw the boards with a screwdriver by placing two 1/2-inch to 1/2 inch from each edge of the seat.
12 Photos Gallery of: Design of Saddle Seat Counter Stool
Warning for saddle seat counter stool, Wood is measured in width and thickness, so that the total length of the board is unimportant. While there is enough wood to cut three 14-inch plates, one piece should be enough.