White Queen Platform Bed – Building a platform bed consists of little more than modeling a box with keys in the center and adjusting a piece at the top. Queen size mattresses are approximately 60 inches wide and 80 inches long. The platform must support these dimensions with approximately 2 additional inches along the sides and at the foot of the bed to account for differences from the manufacturer. With the basic technique in mind, you can customize the plan and build a platform bed for all tastes.
Instructions: Lay a 60 inch long flat gasket. Measure 1 inch from the end and mark with a pencil. Repeat the mark on the opposite end of the board. Repeat at both ends of the other table 60 inches long. Draw a straight line at the ends of the boards white queen platform bed on the marks using a ruler or a carpenter’s square. Select a bit drill is of the same diameter or somewhat smaller than the solid shank of the screws. Connect the drill bit. Three-hole drill, equally spaced, across both 60-inch long plates on each line.
12 Photos Gallery of: How To Build Simple White Queen Platform Bed
Configurations white queen platform bed 60-inch long vertical board over a long edge. Place a 78-inch long board vertically over a long edge. A butt one cut end of the longest board against the shorter side of the board in a row of holes, forming an L or an angle of 90 degrees. Insert the screws through the pilot holes and into the longer dash with an electric drill.exterior paint victorian homes, semi-detached