Diy twin platform bed – Twin size mattresses measures 39 inches x 75 inches. A small bed makes a good do it yourself project. This twin bed using a platform to support the mattress, which eliminates the need for a box spring. The unique shape of the end boards bed to any style, while keeping a low profile. It will work well in the attic bedroom with less headroom
To do construction and side rails and platform of diy twin platform bed: Take one of the 76-inch 2 x 8s and one of the 69-inch 2 x 2s. Apply glue on one side of the 2 x 2 and attach it to the 2 x 8, adjust the long side, leaving 3 1/2 inches at both ends. Clamp the pieces together. Second, drill six holes through the 2 x 2 x 8 -. . The first of 4 1/2 inches from one end, and the rest 12 inches apart. Screw parts together, using 6:02 half-inch screws. Repeat the first two steps with the other 76-inch 2 x 8 and 69-inch 2 x 2s. This completes the two side rails.
12 Photos Gallery of: Diy Twin Platform Bed Construction
Four, add plywood panel on a flat surface. Lift one end and place one of the 2 x 4s under it, so the broad side of the 2 x 4 against the panel. Align the 2 x 4 to the end of the panel, and squeezing it to hold things together. Drill four holes through the panel into 2 x 4-February 1 inch from one end. Then place the other 12 inches apart from it. Apply adhesive on 2 x 4, the screw through the panel in the 2 x 4 with 4:02 half-inch screws. Repeat the last step using other two x 4 on the other end of the panel. Your construction and side rails and platform of diy twin platform bed was done.diy twin platform bed